DIATHER, Diagnostic test, Allergy, dog and cat, 1 piece

How to use:

Wash your hands with warm water and soap, then rinse with plenty of water and dry thoroughly with a paper towel. Disassemble the kit components and remove the test cassette from the foil pouch. Discard the desiccant bag. Twist and remove the lancing blade cover (rotate it carefully 360 degrees, do not pull). Then pull out and discard the blade cover. Press the tip of the lancet against the fingertip (it is recommended to prick the ring fingertip). After use, the lancet tip retracts automatically and safely. The lancing device is a single-use device only. With your hand facing down, massage your fingertip until a large drop of blood is formed. They hold the pipette in a horizontal position, press its expanded part, and place the tip of the pipette on a drop of blood. The blood will be sucked into the pipette. Fill the pipette with blood to just above the tip flare. Do not remove the pipette from your finger to prevent air bubbles. Insert the blood sample (2 drops) into the well of the test cassette marked with the letter S. Press the extended part of the pipette 2 or 3 times to empty its contents. Repeat by introducing the sample into the second well S. Mix carefully and open the buffer vial, add 3 drops of buffer to both wells marked S. Wipe your finger with the sterile gauze included in the kit. Wait 15 minutes and read the result.